Dalian Highland Metals Co., Ltd
banner
Home » Product > Aluminum Plate
Product Categories

Marine Aluminum Plate

Aluminum 5083 is an aluminium alloy suitable for cryogenic applications down to design temperatures of minus 165°C, since alloys of this type do not show the ductile/brittle transition phenomenon. Apart from aluminium, the mainother ingredient is magnesuim. Equivalent specific ations: USA: AA...

Send InquiryChat Now

Aluminum 5083 is an aluminium alloy suitable for cryogenic applications down to design temperatures of minus 165°C, since alloys of this type do    not show the ductile/brittle transition phenomenon. Apart from aluminium, the mainother ingredient is magnesuim.


Equivalent specifications:USA:

AA 5083;

UK:

BS 5083;

Germany:

DIN AlMg4.5Mn;

Europe:

EN AW-A 5083;

Japan:

 5083; JIS A5083P;

France:

NF A5083;

ISO

: Al Mg4.5Mn0.7.The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1). Alloy 5083 can be supplied to meet other national standards

Equivalent specifications:USA:

AA 5083;

UK:

BS 5083;

Germany:

DIN AlMg4.5Mn;

Europe:

EN AW-A 5083;

Japan:

 5083; JIS A5083P;

France:

NF A5083;

ISO

: Al Mg4.5Mn0.7.The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1). Alloy 5083 can be supplied to meet other national standards

Typical Applications

require a weldable alloy of high to moderate strength, with good corrosionresistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs,transportation equipment, armour plate.

Chemical Composition

 AS/NZS 1734 Aluminium and aluminium alloys- Flat sheet, coiled sheet and plate.† For information only, proof stress is not specified or measured except by prior agreement‡ Minimum elongation, actual value depends on thickness – thicker gauges have higher elongation

 Equivalent specifications:USA:

AA 5083;

UK:

BS 5083;

Germany:

DIN AlMg4.5Mn;

Europe:

EN AW-A 5083;

Japan:

 5083; JIS A5083P;

France:

NF A5083;

ISO

: Al Mg4.5Mn0.7.The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1). Alloy 5083 can be supplied to meet other national standards.

Key to tempers:Description

Aluminium 5083 is a strong magnesium-manganese-chromium-aluminium alloy. Itcan be hardened by cold work, but is not heat treatable to higher strength. It has good ductility forthe strength level, better than most other 5000 series alloys (see figure).

 Austral Wright Metals

can supply this alloy as plate, sheet and strip. See Austral Wright MetalsCatalogue for normal stock sizes and tempers.

Pressure Vessels

 AS1210 Pressure Vessels prequalifies alloy 5083 for pressure service fortemperatures up to 65

o

C in the O, H112 & H321 tempers.

Temper 0.2% Proof Stress, MPamin

 TensileStrength, MPaElongation%min

 O (annealed)

125 200 275 350 14

H112

125 275 10

H116

215 305 10

H321

215 295 305 385 10

Element Element % Aluminium

Remainder 

Silicon

0.40 max

Magnesium

4.0 – 4.9

Iron

0.40 max

Manganese

0.40 – 1.0

Copper 

0.10 max

Chromium

0.05 – 0.25

Others, each

0.05 max

Others, total

0.15 max


Equivalent specifications:USA:

AA 5083;

UK:

BS 5083;

Germany:

DIN AlMg4.5Mn;

Europe:

EN AW-A 5083;

Japan:

 5083; JIS A5083P;

France:

NF A5083;

ISO

: Al Mg4.5Mn0.7.The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1). Alloy 5083 can be supplied to meet other national standards

Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.

Equivalent specifications:USA:

AA 5083;

UK:

BS 5083;

Germany:

DIN AlMg4.5Mn;

Europe:

EN AW-A 5083;

Japan:

 5083; JIS A5083P;

France:

NF A5083;

ISO

: Al Mg4.5Mn0.7.The properties in this data sheet meet Australian/New Zealand Standard AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (equivalent to BS EN 573-1). Alloy 5083 can be supplied to meet other national standards


Hot Tags: marine aluminum plate, China, suppliers, factory, wholesale, customized, buy, in stock, price, made in China

Inquiry