Dalian Highland Metals Co., Ltd
banner
Home » News » Content
Product Categories

Aluminum Block Sheet 5052 5083 H112

- Jun 12, 2018 -

Product Description

Aluminum Block 5052 5083 H112
Our Sheet is greatly used in hydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, small boats, gas lines, refrigerator panels, utensils, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, missile components etc.

SpecificationName: 5000 series Aluminum Sheet
Alloy: 5052, 5083 etc.
Temper: H112
Thickness: 0.2-200mm
Width: Up to 1800mm
Length: up to 6000mm
Surface treatment: mill finished, PVC coated, Print marks
FeatureMachinability: It has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may be done dry.
Forming: It is readily formed at room temperature. Successive cold working decreases the formability.
Heat Treatment: It cannot be hardened by means of heat treatment. It does harden due to cold working.
Forging: It may be forged in the temperature range of 950 F down to 500 F
Cold Working: The alloy cold works readily and may be formed by drawing or spinning. However the amount of cold work imparted by spinning makes intermediate annealing necessary.
Annealing: Anneal at 650 F and air cool.
Hardening: Hardens only from cold working.
Applicationhydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, small boats, gas lines, refrigerator panels, utensils, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, missile components etc.
AlloyChemical Component %≤
SiFeCuMnMgCrNiZnTiothersAl
singletotal
50520.250.40.10.12.2-2.80.15-0.3\0.1\0.050.15remainder
50830.40.40.10.4-1.04.0-4.90.05-0.25\0.250.150.050.15remainder